Do you have untreated wooden floors in your house? Many people who want to learn how to clean unfinished hardwood floors will find it easy if they have the right information knowledge.
Well you're in luck! In thiscleaning consultantIn this article we explain in more detail which methods you can use when cleaning your raw wood floor.
Then you will find all the important tips you may need to follow and make sure you finally understand the most important aspects of unfinished wood floors.
Table of Contents
[Show]
- How do you clean untreated wooden floors?
- Top tips for cleaning untreated wooden floors
- wrapping
How do you clean untreated wooden floors?

Would you like to know how to clean untreated wooden floors? Here are some homemade tricks to help keep this stuff clean and shiny so it stays in perfect condition and continues to shine.
1. Vinegar and hot water
Because it's affordable, natural, and safe for pets and children, vinegar and hot water make an excellent cleaning solution for bare wood floors. The hot water loosens any dirt or debris stuck to the floor, while the vinegar disinfects and cleans it.
You must first prepare the cleaning solution. In a clean, empty bucket, pour a cup of white vinegar. Fill the bucket with a gallon of warm or hot water. As long as you stick to this ratio, you can prepare more or less cleaning solution as needed.
Mop the floors in a circular motion, making sure to get into all nooks and crannies. Before stepping on the floor, let it dry completely.
2. Murphys Ölseife
Murphy's Oil Soap is a multi-purpose cleaner that can be used on untreated wood floors. It cleans and disinfects the wood while removing dirt and debris from the floor. The oil soap will help loosen dirt from the floor while the vinegar will sanitize and sanitize.
Fill a quart bucket with warm water and add four capfuls of Murphy's Oil Soap. Before mopping the floors, add 8 ounces of white vinegar to the bucket.
Although this solution may leave a small film on your floors, this can be easily removed with a damp cloth.
3. Mineral spirits
Mineral spirits is a popular cleaning solution for unsealed hardwood floors. It can be used to remove dirt and debris from the floor while also helping to disinfect it. It can help remove mold, dirt, and oil stains.
Be sure to ventilate your home as much as possible before using mineral spirits. If possible, turn on fans and open windows and doors. Keep other people, especially children and pets, away from the area where you are working.
Start by pouring or spraying a small amount of mineral spirits onto a cloth or directly onto the floor. Allow the solution to soak into the stained area for five minutes.
Wipe off the solution and any dirt or debris lifted off the floor with a clean cloth. Rinse the area thoroughly with clean water and towel dry.
4. TSP
TSP is a household cleaner that is suitable for untreated wooden floors and does an excellent job of removing a wide range of stains. It can remove stubborn stains such as mildew, mildew and grease.
First, combine TSP and dish soap in a bucket of hot water. 1/4 cup of TSP per gallon of water is used per gallon of water. Make sure the TSP is completely dissolved by stirring the mixture vigorously.
Avoid puddles of water on the floor as these can damage or stain your unfinished wood floors. When you are finished cleaning, rinse the treated area with clean water.
5. Eis
Chewing gum and other sticky objects can damage untreated hardwood floors. It is necessary to remove the substance as soon as possible before it becomes a permanent part of your flooring.
To start, you'll need some ice and a plastic bag or thin towel (to prevent the ice from damaging your home's surfaces). Place the ice on top of the gum in a plastic bag or between two thin towels.
After about ten minutes, scrape off any leftover residue with a butter knife or spatula. If necessary, you can also use this method to remove candle wax from your floors.
6. Dawn dish soap with water
Unfinished wood floors can be cleaned with a mild soap such as Dawn dish soap. Dirt, grease and other deposits can be removed from the floor covering with a solution of soap and water.
The trick is to use little soap in relation to the amount of water used and not to use too much water on the floors overall. This will prevent floors from becoming excessively soggy and ruined.
In a bucket, combine a tablespoon or two of Dawn dish soap with a gallon of water to clean your floors. Clean your wood floor of any dirt, grease or debris with a scrubbing brush or sponge dipped in the solution.
When you have finished cleaning, be sure to rinse the treated area with clean water and dry it immediately. This method is safe to use on all types of bare wood floors.
Watch this video below for more details on how to clean bare wood floors.
Top tips for cleaning untreated wooden floors

Aside from learning how to clean unfinished hardwood floors, it's also important to take some extra precautions to protect them from damage. And here are some of the tricks on how to make unfinished wood floors shine:
1. Make sure you wear gloves and eye protection when using any method.
2. Be careful not to use too much mineral spirits as this can damage your floors. If you're not sure how much to use, start with a small amount and add more as needed.
3. Use rugs or area rugs in high traffic areas. This protects the flooring from being scratched or damaged by furniture legs, pets or people walking around.
4. You can also put felt pads on the bottom of the furniture legs. These can be found at most hardware stores, and most are fairly inexpensive.
5. Cleaning the unsealed wooden floor with a wet rag is not recommended. Water and unsealed wood do not mix. It quickly rots or gets damaged when it absorbs water. The ideal method is to wipe the wood surface with a damp cloth so that it can dry quickly.
6. You should vacuum or sweep your hardwood floors regularly to get the best cleaning results.
7. Do not leave spilled liquids. Instead, clean them immediately to prevent soaking and damaging the wood surface.
8. You can gently sand the area instead of using a hard wood floor cleaner to give it the best cleaning effect.
What are frequently asked questions?
It is important to take care of the patient and be accompanied by the doctor, but it is a time of great pain and suffering. Because, to get into the smallest detail, nobody should do any kind of work unless they get some benefit out of it.
What are frequently asked questions?
It is important to take care of the patient and be accompanied by the doctor, but it is a time of great pain and suffering. Because, to get into the smallest detail, nobody should do any kind of work unless they get some benefit out of it.
Frequently asked questions about cleaning unfinished wood floors
Can I leave my wooden floors untreated?
Unfinished floors can be quite beautiful and just as durable as finished ones if properly installed and sanded so they don't chip on your feet.
Can Murphy's Oil Soap be used on untreated wood?
Only use natural cleaning products as some chemicals can stain or even warp the wood. Mineral spirits can be made using Murphy's Oil Soap.
You can also clean your unfinished flooring with Murphy soap. This gentle cleaner helps get rid of dirt and grime without producing toxic fumes.
How often do you have to clean untreated parquet floors?
It depends on how often the floor is used or how exposed it is to dust and dirt. You can sweep or dust it in low-traffic areas two or three times a week. When it comes to high-traffic areas, sweep or mop every day or as often as you deem necessary.
wrapping
Hopefully,cleaning consultantThe guide helped you know exactly how to clean unfinished hardwood floors.
When sweeping or vacuuming, remember to be gentle and use as little water as possible. Clean up spills as they happen and your floors should be more than fine.
Do you still have questions about cleaning raw wood floors? Leave us a comment below and we'll get back to you as soon as possible.
FAQs
How do you clean untreated hardwood floors? ›
- Be gentle. Unfinished wood floors require a bit more gentleness. ...
- Use a damp cloth. ...
- Avoid wet-mopping. ...
- Choose the right wood care products. ...
- Gently sand the stained area. ...
- Vacuuming. ...
- Avoid floor soaking at any costs. ...
- Try to avoid spills as much as possible.
Also known as “dry cleaning or soot sponges,” these vulcanized rubber sponge products with a small quantity of added detergent can be effective at picking up dirt from a bare wood surface. The sponge is gently pressed or rolled onto the surface.
What is the best way to clean really dirty wood floors? ›Begin by dusting or sweeping your floors well. Then make a cleaning mixture using 4 cups warm water and a few drops of castile soap or dish soap. Do not shake, but gently mix this, then mop or scrub small sections at a time, drying them with a clean cloth or dry mop after."
What should you not clean hardwood floors with? ›Vinegar and Ammonia: Cleaning products that have a base of vinegar or ammonia eat away at the dirt on your floor - and also the floor's finish itself. Overtime, the acid will wear down your hardwood, leaving you with splotchy patches that are difficult to revive.
What will ruin hardwood floors? ›- Using the Wrong Cleaner & Supplies. ...
- Using a Steam Mop. ...
- High Heels & Things That Squeal. ...
- Using a Vacuum Without a Wood Floor Attachment. ...
- Area Rugs with Rubber Backing. ...
- Too Much Sunshine (Yes, It's a Thing) ...
- Applying Wax to a Urethane Finish. ...
- Waiting Too Long to Refinish.
Surfaces that Should Not Be Cleaned with Vinegar
hardwood floors, wood furniture, and other word surfaces – due to its acidic nature, vinegar can damage hardwood floor finishes, causing them to look dingy. Use either a cleaner specifically made for hardwood floors or a mix of soap and water.
After installing such beautiful natural flooring, you may wonder if it is really necessary to apply wood stain and finish products. Is it okay to leave hardwood floors unfinished? The answer is yes, you do not have to finish a hardwood floor!
Is Dawn dish soap safe for wood floors? ›Dish soap is a gentle cleaner that won't damage the natural wood, and it's perfect for light jobs and daily upkeep alike. In a large bucket, mix two to three tablespoons of dish soap with one gallon of warm water.